Hệ Thống Chlorine Dioxide LOTUS AIR

LOTUS AIR – Hệ Thống Chlorine Dioxide (ClO2) Khử Trùng Nước

LOTUS AIR LOTUS AIR với thước đo đầu dò là máy tạo clo dioxit không áp suất, hữu ích cho những ứng dụng yêu cầu nhiều điểm phun. Clo dioxit được sản xuất từ ​​các hóa chất bazơ pha loãng: quy trình axit-clorit bằng Axit Clohydric (HCl 9%) và Natri Clorit (NaClO 2 7,5%).

Chlorine dioxide do LOTUS AIR sản xuất được dự trữ vào một bể chứa và sau đó được định lượng theo tỷ lệ yêu cầu. Một van đa chức năng đảm bảo sự an toàn của quy trình. LOTUS AIR có thể được trang bị cảm biến phát hiện khí.

• PHẠM VI : 10-60 g/h
• CÔNG SUẤT TỐI ĐA : 1440 g/ngày

CHLORINE DIOXIDE GENERATOR

LOTUS MINI is all-round solution for all your need of water disinfection. LOTUS MINI with probe measure system produces, doses and controls chlorine dioxide for water disinfection. It is equipped with a ClO₂ probe (SCL2 or SCL17) or an mV probe (ERH), a probe holder and a filter.
Chlorine dioxide is produced from diluted base chemicals: acid-chlorite process by hydrochloric acid (HCl 9%) and sodium chlorite (NaClO₂ 7,5%).
Chlorine dioxide produced by LOTUS MINI is set to be proportional to the circulating water flow or based on a set-point – it is then dosed into the water flow. There is no storage of chlorine dioxide hence no chlorine dioxide gas or concentrated solutions exist outside of the process application.

LOTUS MINI with probe measure is designed to produce chlorine dioxide in a reaction chamber. Multifunction valves on the injection points ensure the security of the reaction chamber.
The base chemicals are stored in tanks and fed into the reaction chamber through suction lances. Integrated level switches automatically stop the pumps when the tanks are empty.

GAS SENSOR OPTION
This model of LOTUS MINI is equipped with gas sensor detection.

FEATURES

• Stand-by input
• Multi-point proportional dosing
• Alarms: products – water – emptying
• Water meter input
• Real time production data
• Temperature probe reading (probe and accessories not included)
• Pumps and SEFL flow sensors monitoring
• Service due data
• LOTUS AIR control instrument
• ERMES communication

• ClO2 concentration measure
• PVDF ball valve for reaction chamber empty
• ClO2 concentration: 2 gr/l
• 3 metering pumps: red HCl pump – blue NaCLO2 pump – grey ClO2 pump
• Multifunction valve (MFKT/V)
• Double chamber: reaction and storage
• ASA (Acrylonitrile Styrene Acrylate) or fiberglass (Lotus Air 30/60 models) enclosure
• IP65 protection (NEMA4x) of LOTUS control instrument
• ENCODER wheel control
• Working temperature: 0-45°C (32-110°F)

MODELS

LOTUS AIR 10

HOUR CAPACITY : 10 g/h

PRESSURE : bar

CHEMICAL CONSUMPTION

• HCl 0.25 l/h
• NaClO2 0.25 l/h

CONCENTRATION : 2 g/l

LOTUS AIR 30

HOUR CAPACITY : 30 g/h

PRESSURE : bar

CHEMICAL CONSUMPTION

• HCl 0.75 l/h
• NaClO2 0.75 l/h

CONCENTRATION : 2 g/l

LOTUS AIR 60

HOUR CAPACITY : 60 g/h

PRESSURE : bar

CHEMICAL CONSUMPTION :

• HCl 1.5 l/h
• NaClO2 1.5 l/h

CONCENTRATION : 2 g/l

COMMUNICATION

• ERMES
• MODBUS

CONFIGURATION

CERTIFICATE