JA PRO

HỆ THỐNG ĐỌC ĐƠN GẮN TRÊN GIÁ ĐỠ (96X96)

JA PRO

CONTROL INSTRUMENT

JA PRO control instruments are a series of rack mounting (96×96) single reading systems with temperature reading, mA module and native Modbus. On/Off, impulsive proportional and PID are the main working modes.

It can set and monitor: pH, ORP, chlorine, total chlorine, free chlorine, chlorine dioxide, hydrogen peroxide, ozone, bromine or paracetic acid (depending on the probe) and conductivity with automatic range and select probe / product (Ohm – H3PO4 – H2SO4 – HNO3 – HCl – NaOH – NaCl – TDS / PPM) for best results. Probes are not included.

JA PRO models have: 2 setpoints (on/off, proportional), flow alarm, flow sensor stand-by input, 0-20 mA or 4-20 mA output proportional to read value and programmable in the reading range, alarm output.

Avalilable low voltage 9-18VDC or 18-36VDC power supply and IP54 protection cover.

JA PRO is equipped with mA module and MODBUS serial communication to be connected to other devices on RS485 networks and TCP/IP MODBUS.

MEASUREMENT PARAMETERS

pH ORP Chlorine Hydrogen peroxyde Ozone Peracetic acid Conductivity Bromine Chlorine dioxide

WORKING MODE

  • ON/OFF
  • IMPULSIVE PROPORTIONAL
  • PID

FEATURES

  • 2 On-Off/proportional setpoints
  • Flow alarm
  • Remote control for flow sensor
  • Remote control for flow sensor
  • 0-20 mA or 4-20 mA output proportional to read measured value and programmable in the reading range
  • Temperature compensation with NTC sensor

CERTIFICATE

Quality Austria
Quality Austria
www.qualityaustria.com
IQNet Association
IQNet Association
www.imq.it

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “JA PRO”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *