Bộ điều khiển Centurio Pro

Centurio Pro ( Thiết bị đo và kiểm soát online các chỉ tiêu nước )

Bộ điều khiển CENTURIO có hệ thống điều khiển kỹ thuật số đa tham số có khả năng đáp ứng mọi nhu cầu quản lý định lượng hóa chất nhờ giao diện đơn giản, phần cứng và phần mềm hiệu suất cao.

CENTURIO PRO là giải pháp linh hoạt, đầy đủ và hoàn hảo, được trang bị tất cả các thông số đọc chính và tất cả các chức năng quan trọng nhất để quản lý hệ thống định lượng.

HƯỚNG DẪN

Hướng dẫnThông số

CONTROL INSTRUMENT

CENTURIO control instruments are a series of fully feature control systems for cooling towers.
They manage simultaneously three parameters: pH or ORP, chlorine, conductivity or inductive conductivity (to specify on order) and temperature. Probes are not included.

They can be remotely controlled through the exclusive web management system ERMES.

CENTURIO models have: widescreen LCD display, easy control by encoder wheel, current Feed & Bleed display, local & remote control, simultaneous multiple view for probes reading, permanent data storage with system log, stand-by input, mA output (optional), different working modes (on/off, impulsive proportional, proportional PWM and fixed PWM), pre-bleed (educed water system conductivity before biocide dosing), blow down (discharge control on conductivity values), lockout (discharge valve locked for a settable time, after biocide dosage), timeout (maximum discharge valve opening time), programmable delay at dosing start-up (up to 99 minutes), PT100 temperature compensation and alarms.

MEASUREMENT PARAMETERS

pH ORP Chlorine Conductivity Temperature

WORKING MODE

• ON/OFF
• IMPULSIVE PROPORTIONAL
• PID
• PROPORTIONAL PWM
• FIXED PWM

FEATURES

• REMOTE CONTROL ETHERNET or 2G/3G option configurations are remotely manageable through portal: www.ermes-server. com.
• SOFTWARE Instrument software in English language. French and german available upon request
• CUSTOMIZATIONS Instruments are customizable with client logo on frontal panel
• PERMANENT DATA STORAGE (WITHOUT BATTERY) with system log on display
• DISPLAY Multiple probe readings
• alarms and connection status can be viewed on display
• Stand-by input
• TEMPERATURE PROBE INPUT 1 PT100 temperature probe input
• LOG MENU LOG menu for enable/disable log on output.

• mA OUTPUT (option)
• MULTIPLE PROBE READINGS
• Pre-bleed: Reduced water system conductivity before biocide dosing
• Blow down: Discharge control on conductivity values
• Lockout: Discharge valve locked for a settable time (after biocide dosage)
• Timeout: Maximum discharge valve opening time
• Programmable delay at dosing start-up (up to 99 minutes)
• Priority setting
• Alarms: conductivity (high/low) – Bleed timeout (conductivity not reached after set time) – product level – flow – alarm ‘Concentration factor’.

COMMUNICATION

• ERMES
• MODBUS

CONFIGURATION

CERTIFICATE